Setting up the roller rotary

Setting up the roller rotary, step by step

Used in these articles

• How do I set up my roller rotary?
• Setting up the rotation unit on the BRM Slim

More videos

• 1:34

  Connecting LightBurn over the network on a Ruida RDC6445 (BRM Pro and BRM Slim)

  ---

  • How do I connect a laser machine to LightBurn over the network?>
• 0:53

  Using CerMark from start to finish

  ---

  • How to use CerMark: step by step>
• 0:48

  Dragging the BRM package into LightBurn

  ---

  • Creating a BRM machine in LightBurn (2.0 and above)>
• 2:08

  Connecting LightBurn over the network on a Ruida RDC6332 (BRM Original)

  ---

  • How do I connect a laser machine to LightBurn over the network?>
• 3:04

  Mirror alignment step by step

  ---

  • Double lines in cutting and engraving work>
  • Important precautions before moving your laser machine>
  Check all 6 articles

  • Laser head not perpendicular on the BRM Original>
  • Laser head not perpendicular on the BRM Pro>
  • Mirror alignment>
  • Red pointer not visible on the BRM Original>
• 2:15

  Installing and using the chuck rotary on the BRM Original

  ---

  • Finding the circle pulse for the BRM Original chuck rotary>
  • Using the BRM Original Rotation>
• 0:39

  Taking the lens out of the lens shaft and fitting it back

  ---

  • Lens assembly>
• 1:01

  Finding the ideal focus height by hand

  ---

  • Focus distance (different lenses)>
• 1:20

  Focal lengths of the different lenses

  ---

  • Determining focal length>
  • Different lenses>
  Check all 3 articles

  • Lens compatibility by machine model>
• 0:36

  The Frame slop error explained

  ---

  • Error messages on the laser machine display>

All videos