Ga naar inhoud

Safety Datasheet ZincSelenide (ZnSe)

Deze inhoud is nog niet vertaald.

Section 1. Identification of the substance and company

Section titled “Section 1. Identification of the substance and company”
Product name:Zinc Selenide (ZnSe)
Synonyms, trade names:ZnSe
Identified uses:Optical material for the manufacture of optical components
Company name:BRM Lasers BV
Address:Ambachtsstraat 43
Postal code:7102 DW
Place of residence:Winterswijk
Country:The Netherlands
Telephone:+31 (0)544-350320 (during office hours)
Email:info@brmlasers.com
Emergency telephone numbers:Contact your local emergency services
Contact your national service for poisoning or toxic materials
Hazard description:T Toxic
Information pertaining to particular dangers for man and environment:- R23/25: Toxic by inhalation and if swallowed
- R 33: Danger of cumulative effects

Section 3. Composition/information on ingredients

Section titled “Section 3. Composition/information on ingredients”
Component name:Zinc Selenide
CAS number:1315-09-9
Concentration:100 %
EC number:(EINECS) 215-259-7
EU index:034-002-00-8
UN number:3283
General:- Immediately remove any clothing soiled by the product.
- Remove breathing apparatus only after contaminated clothing has been completely removed.
- In case of irregular breathing or respiratory arrest provide artificial respiration.
After inhalation:- Supply fresh air.
- If required, provide artificial respiration.
- Keep patient warm.
- Seek immediate medical advice.
After skin contact:- Immediately wash with water and soap and rinse thoroughly.
- Seek immediate medical advice.
After eye contact:- Rinse opened eye for several minutes under running water.
- Then consult a doctor.
After swallowing:- Do not induce vomiting.
- immediately call for medical help.
- Seek immediate medical advice.
Suitable extinguishing media:Product is not flammable. Use firefighting measures that suits the surrounding fire.
Special hazards caused by the material, its products of combustion or resulting gases:In case of fire, the following can be released:
- Toxic metal oxide fume
- Hydrogen selenide
Protective equipment:- Wear self-contained respirator.
- Wear fully protective impervious suit.
Person-related safety precautions:- Wear protective equipment.
- Keep unprotected persons away.
- Ensure adequate ventilation.
Measures for environmental protection:Do not allow material to be released to the environment without proper governmental permits.
Measures for cleaning/collecting:- Dispose contaminated material as chemical waste.
- Ensure adequate ventilation.
Handling Information for safe handling:- Keep container tightly sealed.
- Store in cool, dry place in tightly closed containers.
- Ensure good ventilation at the workplace.
- Open and handle container with care.
Information about protection against explosions and fires:No special measures required.
Storage requirements to be met by storerooms and receptacles:No special requirements.
Information about storage in one common storage facility:- Do not store together with acids.
- Store away from oxidizing agents.
- Do not store together with alkalies (caustic solutions).
Further information about storage conditions:- Keep container tightly sealed.
- Store in cool, dry conditions in wellsealed containers.
- Store under lock and key and with access restricted to technical experts or their assistants only.

Section 8. Exposure control and personal protection

Section titled “Section 8. Exposure control and personal protection”
Control parameters:Occupational exposure limits (OEL) = 0.1 mg/m3 as Se in 8 hour Time Weighted Average (TWA).
Exposure controls:- Protective gloves made of PVA are required.
- Use of a laboratory coat is suggested.
- Safety goggles or safety glasses with side shields are required if there is any possibility of chipping or dust creation.
- Respirators must be worn when the threshold limit is exceeded.
- Provide adequate general mechanical ventilation, and local exhaust ventilation.
- Wash hands immediately after handling the product.

Section 9. Physical and chemical properties

Section titled “Section 9. Physical and chemical properties”
Form:Powder, Crystal chunks, Crystals, Plates and elements manufactured from crystals.
Colour:Yellow
Odour:Odourless
Melting point / melting range:1525 °C
Boiling point / boiling range:Not applicable
Sublimation temperature / start:1400 °C
Flash point:Not applicable
Ignition temperature:Not applicable
Decomposition temperature:1400 °C
Danger of explosion:Product does not present an explosion hazard.
Explosion limits:Lower limit: Not applicable
Upper limit: Not applicable
Vapor pressure:At 20 °C: negligible
At 1400 °C: 1 atm.
Density:Crystal at 20 °C 5.264 g/cm3
Solubility in / miscibility with water:Insoluble
Thermal decomposition / conditions to be avoided:Decomposition will not occur if used and stored according to specifications.
Materials to be avoided:- Acids
- Bases
- Oxidizing agents
- Methanol
Dangerous reactions:Contact with acids releases toxic gases.
Acute toxicity:Oral LD50 (Rat) = Non toxic @ 5g/kg
Primary irritant effect:On the skin: Irritant to skin and mucous membranes.
On the eye: Irritating effect
Sensitization:No sensitizing effects known
Sub-acute to chronic toxicity:Additional toxicological information: To the best of our knowledge the acute and chronic toxicity of this substance is not fully known.
- EPA-D: Not classifiable as to human carcinogenicity: inadequate human and animal evidence of carcinogenicity or no data are available.
- IARC-3: Not classifiable as to carcinogenicity to humans.
- NTP-2: Reasonably anticipated to be a carcinogen: limited evidence from studies in humans or sufficient evidence from studies in experimental animals.
General notes:Do not allow material to be released to the environment without proper governmental permits.
Product:Recommendation: consult state, local or national regulations for proper disposal.
Uncleaned packaging:Recommendation: disposal must be made according to official regulations.
DOT regulations:Hazard class: 6.1
Identification number:UN3283
Packing group:III
Proper shipping name (technical name):Selenium compound, n.o.s, zinc selenide Land transport ADR/RID (cross-border)
ADR/RID class:6.1 Poisonous substances
Item:55c
Danger code (ADR):60
UN-Number:3283
Description of goods:Selenium compound, n.o.s., Zinc Selenide
Maritime transport IMDG:IMDG Class: 6.1 Page: 6249-1 UN Number: 3283
Packaging group:III
EMS Number:6.1-04
MFAG:175
Proper shipping name:Selenium compound, n.o.s., Zinc Selenide
Air transport ICAO-TI and IATA-DGR:ICAO/IATA Class” 6.1
UN/ID number:3283
Packaging group:III
Proper shipping name:Selenium compound, n.o.s., Zinc Selenide
Product related hazard information:
Hazard symbols: T:Toxic
Risk phrases:23/25: Toxic by inhalation and if swallowed.
33: Danger of cumulative effects.
Safety phrases:20/21: When using do not eat, drink or smoke.
28: After contact with skin, wash immediately with plenty of water.
45: In case of accident or if you feel unwell, seek medical advice immediately.
Information about limitation of use:For use only by technically qualified individuals. This product contains selenium and is subject to the reporting requirements of section 313 of the Emergency Planning and Community Right to Know Act of 1986 and 40CFR372.

Employers should use this information only as a supplement to other information gathered by them, and should make independent judgement of suitability of this information to ensure proper use and protect the health and safety of employees. This information is furnished without warranty, and any use of the product not in conformance with this Material Safety Data Sheet, or in combination with any other product or process, is the responsibility of the user.