https://support.brmlasers.com/en/videos/using-cermark-from-start-to-finish https://stream.brmlasers.com/31bfd739-1532-48f5-b70c-df0be1e450b6/thumbnail_227fac0c.jpg Using CerMark from start to finish Using CerMark from start to finish: degreasing the part, shaking and spraying the can, drying the coating, marking it with the laser and rinsing off the residue. How to mark metal, glass and ceramics with CerMark laser marking spray on a CO₂ laser: cleaning the surface, spraying an even coat, drying, laser settings, rinsing and storing the can. https://stream.brmlasers.com/31bfd739-1532-48f5-b70c-df0be1e450b6/playlist.m3u8 https://iframe.mediadelivery.net/embed/330148/31bfd739-1532-48f5-b70c-df0be1e450b6 53 2026-10-01T12:22:23.996Z yes no no https://support.brmlasers.com/en/videos/dragging-the-brm-package-into-lightburn https://stream.brmlasers.com/fbe39b0e-cacd-43ca-bf1f-2cf7bfc71170/thumbnail.jpg Dragging the BRM package into LightBurn Dragging the BRM package into LightBurn, importing it, and giving a layer a material setting. How to import official BRM vendor packages (.lbdev) into LightBurn 2.0 and above to configure your laser machine profile, workspace and origin points. https://stream.brmlasers.com/fbe39b0e-cacd-43ca-bf1f-2cf7bfc71170/playlist.m3u8 https://iframe.mediadelivery.net/embed/330148/fbe39b0e-cacd-43ca-bf1f-2cf7bfc71170 48 94 2026-02-24T15:30:16.311Z yes no no https://support.brmlasers.com/en/videos/setting-up-the-roller-rotary https://stream.brmlasers.com/b708c98c-ee7d-428f-962c-8d1d59f97ef9/thumbnail_b3aadc31.jpg Setting up the roller rotary Setting up the roller rotary, step by step. Step-by-step instructions to connect, configure and calibrate the roller rotary unit on BRM Pro and Slim laser machines for cylindrical engraving. https://stream.brmlasers.com/b708c98c-ee7d-428f-962c-8d1d59f97ef9/playlist.m3u8 https://iframe.mediadelivery.net/embed/330148/b708c98c-ee7d-428f-962c-8d1d59f97ef9 160 10 2026-02-11T10:31:19.616Z yes no no https://support.brmlasers.com/en/videos/mirror-alignment-step-by-step https://stream.brmlasers.com/19039523-7aa5-4677-bc15-37fdeaa92e51/thumbnail.jpg Mirror alignment step by step Mirror alignment step by step: mirror 1, mirror 2, mirror 3 and the laser source. Troubleshoot double lines and ghosting in laser cuts: how to distinguish beam reflection off the nozzle from loose optics and mirror misalignment. https://stream.brmlasers.com/19039523-7aa5-4677-bc15-37fdeaa92e51/playlist.m3u8 https://iframe.mediadelivery.net/embed/330148/19039523-7aa5-4677-bc15-37fdeaa92e51 184 1018 2024-10-22T06:18:43.406Z yes no no https://support.brmlasers.com/en/videos/installing-and-using-the-chuck-rotary-on-the-brm-original https://stream.brmlasers.com/b52cbd56-f39f-4d25-a4db-454ec8130e6b/thumbnail.jpg Installing and using the chuck rotary on the BRM Original Installing and using the chuck rotary on the BRM Original. How to calculate and configure the correct circle pulse steps in LaserWork for the BRM Original claw rotary chuck attachment based on motor step ratios. https://stream.brmlasers.com/b52cbd56-f39f-4d25-a4db-454ec8130e6b/playlist.m3u8 https://iframe.mediadelivery.net/embed/330148/b52cbd56-f39f-4d25-a4db-454ec8130e6b 135 202 2024-10-22T06:18:42.025Z yes no no https://support.brmlasers.com/en/videos/taking-the-lens-out-of-the-lens-shaft-and-fitting-it-back https://stream.brmlasers.com/f97db4e2-4546-4508-b12c-ef7d535e485b/thumbnail.jpg Taking the lens out of the lens shaft and fitting it back Taking the lens out of the lens shaft and fitting it back, convex side up. How to assemble and orient a CO₂ laser lens correctly: convex side facing up, flat side down, and securing the retaining ring without scratching optics. https://stream.brmlasers.com/f97db4e2-4546-4508-b12c-ef7d535e485b/playlist.m3u8 https://iframe.mediadelivery.net/embed/330148/f97db4e2-4546-4508-b12c-ef7d535e485b 39 241 2024-10-22T06:18:36.981Z yes no no https://support.brmlasers.com/en/videos/finding-the-ideal-focus-height-by-hand https://stream.brmlasers.com/e51275db-de1f-4ee4-9209-790007d9d0cc/thumbnail.jpg Finding the ideal focus height by hand Finding the ideal focus height by hand, step by step. Find the exact focus distance and step gauge height for 50.8 mm, 63.5 mm and 101.6 mm lenses across BRM Pro, Slim, Original and Budget laser machines. https://stream.brmlasers.com/e51275db-de1f-4ee4-9209-790007d9d0cc/playlist.m3u8 https://iframe.mediadelivery.net/embed/330148/e51275db-de1f-4ee4-9209-790007d9d0cc 61 248 2024-10-22T06:18:34.862Z yes no no https://support.brmlasers.com/en/videos/focal-lengths-of-the-different-lenses https://stream.brmlasers.com/11ca46b5-141f-47e8-a254-8aebface1961/thumbnail.jpg Focal lengths of the different lenses Focal lengths of the different lenses, and the lens position each one needs. Learn how to measure and determine the exact focal length of an unmarked CO₂ laser lens using simple light projection and focal point measurement. https://stream.brmlasers.com/11ca46b5-141f-47e8-a254-8aebface1961/playlist.m3u8 https://iframe.mediadelivery.net/embed/330148/11ca46b5-141f-47e8-a254-8aebface1961 80 378 2024-10-22T06:18:24.620Z yes no no https://support.brmlasers.com/en/videos/the-frame-slop-error-explained https://stream.brmlasers.com/1f90c039-6847-415c-acb2-927bdd16f18f/thumbnail.jpg The Frame slop error explained The Frame slop error explained. Comprehensive guide to Ruida and Leetro controller error messages on BRM laser machines, explaining their causes, safety triggers and step-by-step fixes. https://stream.brmlasers.com/1f90c039-6847-415c-acb2-927bdd16f18f/playlist.m3u8 https://iframe.mediadelivery.net/embed/330148/1f90c039-6847-415c-acb2-927bdd16f18f 36 12 2024-10-22T06:18:23.550Z yes no no https://support.brmlasers.com/nl/videos/using-cermark-from-start-to-finish https://stream.brmlasers.com/31bfd739-1532-48f5-b70c-df0be1e450b6/thumbnail_227fac0c.jpg CerMark van begin tot eind CerMark van begin tot eind: het werkstuk ontvetten, de spuitbus schudden en spuiten, de coating laten drogen, markeren met de laser en de restanten afspoelen. Zo markeer je metaal, glas en keramiek met CerMark-lasermarkeerspray op een CO₂-laser: het oppervlak reinigen, een gelijkmatige laag spuiten, drogen, laserinstellingen, afspoelen en de spuitbus opbergen. https://stream.brmlasers.com/31bfd739-1532-48f5-b70c-df0be1e450b6/playlist.m3u8 https://iframe.mediadelivery.net/embed/330148/31bfd739-1532-48f5-b70c-df0be1e450b6 53 2026-10-01T12:22:23.996Z yes no no https://support.brmlasers.com/nl/videos/dragging-the-brm-package-into-lightburn https://stream.brmlasers.com/fbe39b0e-cacd-43ca-bf1f-2cf7bfc71170/thumbnail.jpg Het BRM-pakket in LightBurn slepen Het BRM-pakket in LightBurn slepen, importeren en een laag een materiaalinstelling geven. Hoe je officiële BRM-machinepakketten (.lbdev) importeert in LightBurn 2.0 en hoger om je lasermachineprofiel, werkbereik en nulpunt direct in te stellen. https://stream.brmlasers.com/fbe39b0e-cacd-43ca-bf1f-2cf7bfc71170/playlist.m3u8 https://iframe.mediadelivery.net/embed/330148/fbe39b0e-cacd-43ca-bf1f-2cf7bfc71170 48 94 2026-02-24T15:30:16.311Z yes no no https://support.brmlasers.com/nl/videos/setting-up-the-roller-rotary https://stream.brmlasers.com/80510a0d-b4bd-48a7-bcef-0a9b5cd2f1b2/thumbnail_2a74abca.jpg De rollerrotatie stap voor stap instellen De rollerrotatie stap voor stap instellen. Stappenplan om de rollenrotatie-eenheid aan te sluiten, te configureren en te kalibreren op BRM Pro en Slim lasermachines voor rondgraveren. https://stream.brmlasers.com/80510a0d-b4bd-48a7-bcef-0a9b5cd2f1b2/playlist.m3u8 https://iframe.mediadelivery.net/embed/330148/80510a0d-b4bd-48a7-bcef-0a9b5cd2f1b2 160 29 2026-02-11T10:31:12.074Z yes no no https://support.brmlasers.com/nl/videos/mirror-alignment-step-by-step https://stream.brmlasers.com/19039523-7aa5-4677-bc15-37fdeaa92e51/thumbnail.jpg Spiegeluitlijning stap voor stap Spiegeluitlijning stap voor stap: spiegel 1, spiegel 2, spiegel 3 en de laserbron. Je gebruikt de machine graag maar eigenlijk moet de machine verplaatst worden. Wanneer de machine verplaatst of verhuist moet worden dan zijn er een aantal dingen waar je rekening mee moet houden. https://stream.brmlasers.com/19039523-7aa5-4677-bc15-37fdeaa92e51/playlist.m3u8 https://iframe.mediadelivery.net/embed/330148/19039523-7aa5-4677-bc15-37fdeaa92e51 184 1018 2024-10-22T06:18:43.406Z yes no no https://support.brmlasers.com/nl/videos/installing-and-using-the-chuck-rotary-on-the-brm-original https://stream.brmlasers.com/b52cbd56-f39f-4d25-a4db-454ec8130e6b/thumbnail.jpg De klauwrotatie van de BRM Original installeren en gebruiken De klauwrotatie van de BRM Original installeren en gebruiken. Hoe je de klauwrotatie op de BRM Original aansluit, mechanisch instelt en gebruikt voor het rondom graveren van cilindrische voorwerpen en glazen. https://stream.brmlasers.com/b52cbd56-f39f-4d25-a4db-454ec8130e6b/playlist.m3u8 https://iframe.mediadelivery.net/embed/330148/b52cbd56-f39f-4d25-a4db-454ec8130e6b 135 202 2024-10-22T06:18:42.025Z yes no no https://support.brmlasers.com/nl/videos/taking-the-lens-out-of-the-lens-shaft-and-fitting-it-back https://stream.brmlasers.com/f97db4e2-4546-4508-b12c-ef7d535e485b/thumbnail.jpg De lens uit de lensschacht halen en terugplaatsen De lens uit de lensschacht halen en terugplaatsen, bolle kant omhoog. Hoe je een CO₂-laserlens monteert: bolle zijde omhoog naar de laserstraal, vlakke zijde omlaag, en de borgring vastzetten zonder optiek te beschadigen. https://stream.brmlasers.com/f97db4e2-4546-4508-b12c-ef7d535e485b/playlist.m3u8 https://iframe.mediadelivery.net/embed/330148/f97db4e2-4546-4508-b12c-ef7d535e485b 39 241 2024-10-22T06:18:36.981Z yes no no https://support.brmlasers.com/nl/videos/finding-the-ideal-focus-height-by-hand https://stream.brmlasers.com/e51275db-de1f-4ee4-9209-790007d9d0cc/thumbnail.jpg Stap voor stap met de hand de ideale focushoogte bepalen Stap voor stap met de hand de ideale focushoogte bepalen. Bekijk de exacte focusafstand en meethoogte voor 50,8 mm, 63,5 mm en 101,6 mm lenzen op BRM Pro, Slim, Original en Budget lasermachines. https://stream.brmlasers.com/e51275db-de1f-4ee4-9209-790007d9d0cc/playlist.m3u8 https://iframe.mediadelivery.net/embed/330148/e51275db-de1f-4ee4-9209-790007d9d0cc 61 248 2024-10-22T06:18:34.862Z yes no no https://support.brmlasers.com/nl/videos/focal-lengths-of-the-different-lenses https://stream.brmlasers.com/11ca46b5-141f-47e8-a254-8aebface1961/thumbnail.jpg De brandpuntsafstanden van de verschillende lenzen De brandpuntsafstanden van de verschillende lenzen, en welke lenspositie elke lens nodig heeft. Ontdek hoe je de exacte brandpuntsafstand van een ongemerkte CO₂-laserlens meet en bepaalt met eenvoudige lichtprojectie en focuspunttests. https://stream.brmlasers.com/11ca46b5-141f-47e8-a254-8aebface1961/playlist.m3u8 https://iframe.mediadelivery.net/embed/330148/11ca46b5-141f-47e8-a254-8aebface1961 80 378 2024-10-22T06:18:24.620Z yes no no https://support.brmlasers.com/nl/videos/the-frame-slop-error-explained https://stream.brmlasers.com/1f90c039-6847-415c-acb2-927bdd16f18f/thumbnail.jpg De foutmelding Frame slop uitgelegd De foutmelding Frame slop uitgelegd. Overzicht van foutmeldingen op Ruida- en Leetro-controllers van BRM-lasers: ontdek de betekenis van veiligheidsmeldingen en hoe je ze direct oplost. https://stream.brmlasers.com/1f90c039-6847-415c-acb2-927bdd16f18f/playlist.m3u8 https://iframe.mediadelivery.net/embed/330148/1f90c039-6847-415c-acb2-927bdd16f18f 36 12 2024-10-22T06:18:23.550Z yes no no https://support.brmlasers.com/de/videos/using-cermark-from-start-to-finish https://stream.brmlasers.com/31bfd739-1532-48f5-b70c-df0be1e450b6/thumbnail_227fac0c.jpg CerMark von Anfang bis Ende CerMark von Anfang bis Ende: Werkstück entfetten, Dose schütteln und sprühen, Beschichtung trocknen, mit dem Laser markieren und die Rückstände abspülen. So markieren Sie Metall, Glas und Keramik mit CerMark-Lasermarkierungsspray auf einem CO₂-Laser: Oberfläche reinigen, gleichmäßig sprühen, trocknen, Lasereinstellungen, abspülen und die Dose lagern. https://stream.brmlasers.com/31bfd739-1532-48f5-b70c-df0be1e450b6/playlist.m3u8 https://iframe.mediadelivery.net/embed/330148/31bfd739-1532-48f5-b70c-df0be1e450b6 53 2026-10-01T12:22:23.996Z yes no no https://support.brmlasers.com/de/videos/dragging-the-brm-package-into-lightburn https://stream.brmlasers.com/fbe39b0e-cacd-43ca-bf1f-2cf7bfc71170/thumbnail.jpg Das BRM-Paket in LightBurn ziehen Das BRM-Paket in LightBurn ziehen, importieren und einer Ebene eine Materialeinstellung zuweisen. Offizielle BRM-Gerätepakete (.lbdev) in LightBurn 2.0 und neuer importieren, um Maschinenprofile, Arbeitsbereich und Nullpunkte automatisch einzurichten. https://stream.brmlasers.com/fbe39b0e-cacd-43ca-bf1f-2cf7bfc71170/playlist.m3u8 https://iframe.mediadelivery.net/embed/330148/fbe39b0e-cacd-43ca-bf1f-2cf7bfc71170 48 94 2026-02-24T15:30:16.311Z yes no no https://support.brmlasers.com/de/videos/setting-up-the-roller-rotary https://stream.brmlasers.com/22504d77-3875-4860-8c7b-cc88616f21c1/thumbnail_354f086b.jpg Die Rollenrotation Schritt für Schritt einrichten Die Rollenrotation Schritt für Schritt einrichten. Anleitung zum Anschließen, Aktivieren und Ausrichten der Rotationsvorrichtung auf der BRM Slim zum Gravieren von Gläsern, Tassen und Flaschen. https://stream.brmlasers.com/22504d77-3875-4860-8c7b-cc88616f21c1/playlist.m3u8 https://iframe.mediadelivery.net/embed/330148/22504d77-3875-4860-8c7b-cc88616f21c1 160 6 2026-02-11T10:31:42.481Z yes no no https://support.brmlasers.com/de/videos/mirror-alignment-step-by-step https://stream.brmlasers.com/19039523-7aa5-4677-bc15-37fdeaa92e51/thumbnail.jpg Spiegelausrichtung Schritt für Schritt Spiegelausrichtung Schritt für Schritt: Spiegel 1, Spiegel 2, Spiegel 3 und die Laserquelle. Nach einer Kollision zwischen Laserkopf und Material kann es passieren, dass der Kopf nicht mehr exakt rechtwinklig steht. Das wirkt sich auf Schnitt- und Gravurergebnisse aus, z. B. weniger Leistung oder eine „Schattenlinie“ neben der eigentlichen Linie. https://stream.brmlasers.com/19039523-7aa5-4677-bc15-37fdeaa92e51/playlist.m3u8 https://iframe.mediadelivery.net/embed/330148/19039523-7aa5-4677-bc15-37fdeaa92e51 184 1018 2024-10-22T06:18:43.406Z yes no no https://support.brmlasers.com/de/videos/installing-and-using-the-chuck-rotary-on-the-brm-original https://stream.brmlasers.com/b52cbd56-f39f-4d25-a4db-454ec8130e6b/thumbnail.jpg Die Spannfutter-Rotation (Chuck) der BRM Original montieren und verwenden Die Spannfutter-Rotation (Chuck) der BRM Original montieren und verwenden. Der Kreispuls (Circle Pulse) ist das Verhältnis der Anzahl von Schritten, die der Motor für eine vollständige Umdrehung ausführen muss. Abhängig vom verbauten Motor ist die benötigte Pulszahl unterschiedlich und damit auch der einzustellende Wert. https://stream.brmlasers.com/b52cbd56-f39f-4d25-a4db-454ec8130e6b/playlist.m3u8 https://iframe.mediadelivery.net/embed/330148/b52cbd56-f39f-4d25-a4db-454ec8130e6b 135 202 2024-10-22T06:18:42.025Z yes no no https://support.brmlasers.com/de/videos/taking-the-lens-out-of-the-lens-shaft-and-fitting-it-back https://stream.brmlasers.com/f97db4e2-4546-4508-b12c-ef7d535e485b/thumbnail.jpg Die Linse aus dem Linsenschaft nehmen und wieder einsetzen Die Linse aus dem Linsenschaft nehmen und wieder einsetzen, konvexe Seite nach oben. So montieren Sie eine CO₂-Laserlinse korrekt: gewölbte Seite nach oben zum Laserstrahl, flache Seite nach unten, Sicherungsring schonend fixieren. https://stream.brmlasers.com/f97db4e2-4546-4508-b12c-ef7d535e485b/playlist.m3u8 https://iframe.mediadelivery.net/embed/330148/f97db4e2-4546-4508-b12c-ef7d535e485b 39 241 2024-10-22T06:18:36.981Z yes no no https://support.brmlasers.com/de/videos/finding-the-ideal-focus-height-by-hand https://stream.brmlasers.com/e51275db-de1f-4ee4-9209-790007d9d0cc/thumbnail.jpg Die ideale Fokushöhe Schritt für Schritt von Hand bestimmen Die ideale Fokushöhe Schritt für Schritt von Hand bestimmen. Ermitteln Sie Fokusabstand und Lehrenhöhe für 50,8 mm, 63,5 mm und 101,6 mm Linsen auf BRM Pro, Slim, Original und Budget Lasermaschinen. https://stream.brmlasers.com/e51275db-de1f-4ee4-9209-790007d9d0cc/playlist.m3u8 https://iframe.mediadelivery.net/embed/330148/e51275db-de1f-4ee4-9209-790007d9d0cc 61 248 2024-10-22T06:18:34.862Z yes no no https://support.brmlasers.com/de/videos/focal-lengths-of-the-different-lenses https://stream.brmlasers.com/11ca46b5-141f-47e8-a254-8aebface1961/thumbnail.jpg Die Brennweiten der verschiedenen Linsen und die Linsenposition Die Brennweiten der verschiedenen Linsen und die Linsenposition, die jede Linse benötigt. Erfahren Sie, wie Sie die exakte Brennweite einer unbeschrifteten CO₂-Laserlinse durch einfache Lichtprojektion und Brennpunktmessung bestimmen. https://stream.brmlasers.com/11ca46b5-141f-47e8-a254-8aebface1961/playlist.m3u8 https://iframe.mediadelivery.net/embed/330148/11ca46b5-141f-47e8-a254-8aebface1961 80 378 2024-10-22T06:18:24.620Z yes no no https://support.brmlasers.com/de/videos/the-frame-slop-error-explained https://stream.brmlasers.com/1f90c039-6847-415c-acb2-927bdd16f18f/thumbnail.jpg Die Fehlermeldung Frame slop erklärt Die Fehlermeldung Frame slop erklärt. Fehlermeldungen auf Ruida- und Leetro-Controllern von BRM-Lasern: Ursachen von Sicherheitswarnungen verstehen und Fehlermeldungen gezielt beheben. https://stream.brmlasers.com/1f90c039-6847-415c-acb2-927bdd16f18f/playlist.m3u8 https://iframe.mediadelivery.net/embed/330148/1f90c039-6847-415c-acb2-927bdd16f18f 36 12 2024-10-22T06:18:23.550Z yes no no https://support.brmlasers.com/fr/videos/using-cermark-from-start-to-finish https://stream.brmlasers.com/31bfd739-1532-48f5-b70c-df0be1e450b6/thumbnail_227fac0c.jpg CerMark du début à la fin CerMark du début à la fin : dégraisser la pièce, agiter et pulvériser la bombe, faire sécher le revêtement, marquer au laser et rincer les résidus. Comment marquer le métal, le verre et la céramique avec le spray de marquage laser CerMark sur un laser CO₂ : nettoyer la surface, pulvériser une couche régulière, sécher, réglages laser, rincer et ranger la bombe. https://stream.brmlasers.com/31bfd739-1532-48f5-b70c-df0be1e450b6/playlist.m3u8 https://iframe.mediadelivery.net/embed/330148/31bfd739-1532-48f5-b70c-df0be1e450b6 53 2026-10-01T12:22:23.996Z yes no no https://support.brmlasers.com/fr/videos/dragging-the-brm-package-into-lightburn https://stream.brmlasers.com/fbe39b0e-cacd-43ca-bf1f-2cf7bfc71170/thumbnail.jpg Glisser le paquet BRM dans LightBurn Glisser le paquet BRM dans LightBurn, l'importer et attribuer un réglage de matériau à un calque. LightBurn peut importer des packages fabricant contenant des profils machine. Comment faire ? https://stream.brmlasers.com/fbe39b0e-cacd-43ca-bf1f-2cf7bfc71170/playlist.m3u8 https://iframe.mediadelivery.net/embed/330148/fbe39b0e-cacd-43ca-bf1f-2cf7bfc71170 48 94 2026-02-24T15:30:16.311Z yes no no https://support.brmlasers.com/fr/videos/setting-up-the-roller-rotary https://stream.brmlasers.com/b708c98c-ee7d-428f-962c-8d1d59f97ef9/thumbnail_b3aadc31.jpg Installer la rotation à rouleaux Installer la rotation à rouleaux, étape par étape. Pour utiliser la Pro avec la rotation à rouleaux, vous devez suivre un certain nombre d'étapes. https://stream.brmlasers.com/b708c98c-ee7d-428f-962c-8d1d59f97ef9/playlist.m3u8 https://iframe.mediadelivery.net/embed/330148/b708c98c-ee7d-428f-962c-8d1d59f97ef9 160 10 2026-02-11T10:31:19.616Z yes no no https://support.brmlasers.com/fr/videos/mirror-alignment-step-by-step https://stream.brmlasers.com/19039523-7aa5-4677-bc15-37fdeaa92e51/thumbnail.jpg Alignement des miroirs étape par étape Alignement des miroirs étape par étape : miroir 1, miroir 2, miroir 3 et la source laser. Guide pas à pas pour aligner les miroirs et obtenir une qualité de faisceau et des performances de découpe optimales. https://stream.brmlasers.com/19039523-7aa5-4677-bc15-37fdeaa92e51/playlist.m3u8 https://iframe.mediadelivery.net/embed/330148/19039523-7aa5-4677-bc15-37fdeaa92e51 184 1018 2024-10-22T06:18:43.406Z yes no no https://support.brmlasers.com/fr/videos/installing-and-using-the-chuck-rotary-on-the-brm-original https://stream.brmlasers.com/b52cbd56-f39f-4d25-a4db-454ec8130e6b/thumbnail.jpg Installer et utiliser la rotation à mandrin de la BRM Original Installer et utiliser la rotation à mandrin de la BRM Original. Le circle pulse est le nombre de pas dont le moteur a besoin pour faire 1 tour. Selon le moteur monté, ce nombre d'impulsions diffère, et il vous faut donc une autre valeur. https://stream.brmlasers.com/b52cbd56-f39f-4d25-a4db-454ec8130e6b/playlist.m3u8 https://iframe.mediadelivery.net/embed/330148/b52cbd56-f39f-4d25-a4db-454ec8130e6b 135 202 2024-10-22T06:18:42.025Z yes no no https://support.brmlasers.com/fr/videos/taking-the-lens-out-of-the-lens-shaft-and-fitting-it-back https://stream.brmlasers.com/f97db4e2-4546-4508-b12c-ef7d535e485b/thumbnail.jpg Retirer la lentille du tube de lentille et la remettre en place Retirer la lentille du tube de lentille et la remettre en place, face convexe vers le haut. Comment retirer et remettre en place la lentille dans le tube de lentille. https://stream.brmlasers.com/f97db4e2-4546-4508-b12c-ef7d535e485b/playlist.m3u8 https://iframe.mediadelivery.net/embed/330148/f97db4e2-4546-4508-b12c-ef7d535e485b 39 241 2024-10-22T06:18:36.981Z yes no no https://support.brmlasers.com/fr/videos/finding-the-ideal-focus-height-by-hand https://stream.brmlasers.com/e51275db-de1f-4ee4-9209-790007d9d0cc/thumbnail.jpg Déterminer à la main la hauteur de focalisation idéale Déterminer à la main la hauteur de focalisation idéale, étape par étape. Comment régler manuellement la bonne hauteur de focalisation pour chaque lentille. https://stream.brmlasers.com/e51275db-de1f-4ee4-9209-790007d9d0cc/playlist.m3u8 https://iframe.mediadelivery.net/embed/330148/e51275db-de1f-4ee4-9209-790007d9d0cc 61 248 2024-10-22T06:18:34.862Z yes no no https://support.brmlasers.com/fr/videos/focal-lengths-of-the-different-lenses https://stream.brmlasers.com/11ca46b5-141f-47e8-a254-8aebface1961/thumbnail.jpg Les distances focales des différentes lentilles et la position de lentille propre à chacune Les distances focales des différentes lentilles et la position de lentille propre à chacune. Vérifiez quelles lentilles sont compatibles avec votre machine BRM et comment les tubes de lentille sont configurés sur les modèles Budget, Original, Pro et Slim. https://stream.brmlasers.com/11ca46b5-141f-47e8-a254-8aebface1961/playlist.m3u8 https://iframe.mediadelivery.net/embed/330148/11ca46b5-141f-47e8-a254-8aebface1961 80 378 2024-10-22T06:18:24.620Z yes no no https://support.brmlasers.com/fr/videos/the-frame-slop-error-explained https://stream.brmlasers.com/1f90c039-6847-415c-acb2-927bdd16f18f/thumbnail.jpg Le message d'erreur Frame slop expliqué Le message d'erreur Frame slop expliqué. Les messages d'erreur ne tombent jamais bien. Voici comment résoudre chacun d'eux. https://stream.brmlasers.com/1f90c039-6847-415c-acb2-927bdd16f18f/playlist.m3u8 https://iframe.mediadelivery.net/embed/330148/1f90c039-6847-415c-acb2-927bdd16f18f 36 12 2024-10-22T06:18:23.550Z yes no no https://support.brmlasers.com/no/videos/using-cermark-from-start-to-finish https://stream.brmlasers.com/31bfd739-1532-48f5-b70c-df0be1e450b6/thumbnail_227fac0c.jpg CerMark fra start til slutt CerMark fra start til slutt: avfette emnet, riste og spraye boksen, la belegget tørke, merke med laseren og skylle av restene. Slik merker du metall, glass og keramikk med CerMark lasermerkespray på en CO₂-laser: rengjøre overflaten, spraye et jevnt lag, tørke, laserinnstillinger, skylle og lagre boksen. https://stream.brmlasers.com/31bfd739-1532-48f5-b70c-df0be1e450b6/playlist.m3u8 https://iframe.mediadelivery.net/embed/330148/31bfd739-1532-48f5-b70c-df0be1e450b6 53 2026-10-01T12:22:23.996Z yes no no https://support.brmlasers.com/no/videos/dragging-the-brm-package-into-lightburn https://stream.brmlasers.com/fbe39b0e-cacd-43ca-bf1f-2cf7bfc71170/thumbnail.jpg Dra BRM-pakken inn i LightBurn Dra BRM-pakken inn i LightBurn, importere den og gi et lag en materialinnstilling. LightBurn kan importere leverandørpakker med maskinprofiler. Slik gjør du det. https://stream.brmlasers.com/fbe39b0e-cacd-43ca-bf1f-2cf7bfc71170/playlist.m3u8 https://iframe.mediadelivery.net/embed/330148/fbe39b0e-cacd-43ca-bf1f-2cf7bfc71170 48 94 2026-02-24T15:30:16.311Z yes no no https://support.brmlasers.com/no/videos/setting-up-the-roller-rotary https://stream.brmlasers.com/b708c98c-ee7d-428f-962c-8d1d59f97ef9/thumbnail_b3aadc31.jpg Sette opp rullerotasjonen Sette opp rullerotasjonen, steg for steg. Når du vil begynne å arbeide med Slim og rotasjonsenheten, er det en rekke trinn du må følge. https://stream.brmlasers.com/b708c98c-ee7d-428f-962c-8d1d59f97ef9/playlist.m3u8 https://iframe.mediadelivery.net/embed/330148/b708c98c-ee7d-428f-962c-8d1d59f97ef9 160 10 2026-02-11T10:31:19.616Z yes no no https://support.brmlasers.com/no/videos/mirror-alignment-step-by-step https://stream.brmlasers.com/19039523-7aa5-4677-bc15-37fdeaa92e51/thumbnail.jpg Speiljustering steg for steg Speiljustering steg for steg: speil 1, speil 2, speil 3 og laserkilden. Har du en BRM Original, har du sannsynligvis en rød peker. Den røde pekeren viser en hjelpelinje som er nyttig når du vil ha en indikasjon på omtrent hvor du skal skjære eller gravere. https://stream.brmlasers.com/19039523-7aa5-4677-bc15-37fdeaa92e51/playlist.m3u8 https://iframe.mediadelivery.net/embed/330148/19039523-7aa5-4677-bc15-37fdeaa92e51 184 1018 2024-10-22T06:18:43.406Z yes no no https://support.brmlasers.com/no/videos/installing-and-using-the-chuck-rotary-on-the-brm-original https://stream.brmlasers.com/b52cbd56-f39f-4d25-a4db-454ec8130e6b/thumbnail.jpg Montere og bruke rotasjonen med chuck på BRM Original Montere og bruke rotasjonen med chuck på BRM Original. Har du en BRM Original, fikk du en rotasjonsenhet med chuck sammen med maskinen. I videoen nedenfor ser du hvordan du monterer og bruker den. https://stream.brmlasers.com/b52cbd56-f39f-4d25-a4db-454ec8130e6b/playlist.m3u8 https://iframe.mediadelivery.net/embed/330148/b52cbd56-f39f-4d25-a4db-454ec8130e6b 135 202 2024-10-22T06:18:42.025Z yes no no https://support.brmlasers.com/no/videos/taking-the-lens-out-of-the-lens-shaft-and-fitting-it-back https://stream.brmlasers.com/f97db4e2-4546-4508-b12c-ef7d535e485b/thumbnail.jpg Ta linsen ut av linseakselen og sette den inn igjen Ta linsen ut av linseakselen og sette den inn igjen, med den konvekse siden opp. Her finner du mer informasjon om hvordan du tar ut og setter inn linsen. https://stream.brmlasers.com/f97db4e2-4546-4508-b12c-ef7d535e485b/playlist.m3u8 https://iframe.mediadelivery.net/embed/330148/f97db4e2-4546-4508-b12c-ef7d535e485b 39 241 2024-10-22T06:18:36.981Z yes no no https://support.brmlasers.com/no/videos/finding-the-ideal-focus-height-by-hand https://stream.brmlasers.com/e51275db-de1f-4ee4-9209-790007d9d0cc/thumbnail.jpg Finne den ideelle fokushøyden for hånd Finne den ideelle fokushøyden for hånd, steg for steg. Her finner du mer informasjon om fokusavstanden med forskjellige linser, og hvordan du stiller inn riktig fokushøyde. https://stream.brmlasers.com/e51275db-de1f-4ee4-9209-790007d9d0cc/playlist.m3u8 https://iframe.mediadelivery.net/embed/330148/e51275db-de1f-4ee4-9209-790007d9d0cc 61 248 2024-10-22T06:18:34.862Z yes no no https://support.brmlasers.com/no/videos/focal-lengths-of-the-different-lenses https://stream.brmlasers.com/11ca46b5-141f-47e8-a254-8aebface1961/thumbnail.jpg Brennviddene til de ulike linsene Brennviddene til de ulike linsene, og hvilken linseposisjon hver linse trenger. Her finner du mer informasjon om hvordan du bestemmer brennvidden til linsen. https://stream.brmlasers.com/11ca46b5-141f-47e8-a254-8aebface1961/playlist.m3u8 https://iframe.mediadelivery.net/embed/330148/11ca46b5-141f-47e8-a254-8aebface1961 80 378 2024-10-22T06:18:24.620Z yes no no https://support.brmlasers.com/no/videos/the-frame-slop-error-explained https://stream.brmlasers.com/1f90c039-6847-415c-acb2-927bdd16f18f/thumbnail.jpg Feilmeldingen Frame slop forklart Feilmeldingen Frame slop forklart. Feilmeldinger kommer aldri beleilig. Her ser du hvordan du løser hvilken feil. https://stream.brmlasers.com/1f90c039-6847-415c-acb2-927bdd16f18f/playlist.m3u8 https://iframe.mediadelivery.net/embed/330148/1f90c039-6847-415c-acb2-927bdd16f18f 36 12 2024-10-22T06:18:23.550Z yes no no https://support.brmlasers.com/sv/videos/using-cermark-from-start-to-finish https://stream.brmlasers.com/31bfd739-1532-48f5-b70c-df0be1e450b6/thumbnail_227fac0c.jpg CerMark från början till slut CerMark från början till slut: avfetta arbetsstycket, skaka och spraya burken, låta beläggningen torka, märka med lasern och skölja av resterna. Så märker du metall, glas och keramik med CerMark lasermärkningsspray på en CO₂-laser: rengöra ytan, spraya ett jämnt lager, torka, laserinställningar, skölja av och förvara burken. https://stream.brmlasers.com/31bfd739-1532-48f5-b70c-df0be1e450b6/playlist.m3u8 https://iframe.mediadelivery.net/embed/330148/31bfd739-1532-48f5-b70c-df0be1e450b6 53 2026-10-01T12:22:23.996Z yes no no https://support.brmlasers.com/sv/videos/dragging-the-brm-package-into-lightburn https://stream.brmlasers.com/fbe39b0e-cacd-43ca-bf1f-2cf7bfc71170/thumbnail.jpg Dra BRM-paketet till LightBurn Dra BRM-paketet till LightBurn, importera det och ge ett lager en materialinställning. LightBurn kan importera leverantörspaket med maskinprofiler. Så gör du. https://stream.brmlasers.com/fbe39b0e-cacd-43ca-bf1f-2cf7bfc71170/playlist.m3u8 https://iframe.mediadelivery.net/embed/330148/fbe39b0e-cacd-43ca-bf1f-2cf7bfc71170 48 94 2026-02-24T15:30:16.311Z yes no no https://support.brmlasers.com/sv/videos/setting-up-the-roller-rotary https://stream.brmlasers.com/b708c98c-ee7d-428f-962c-8d1d59f97ef9/thumbnail_b3aadc31.jpg Ställa in rullrotationen Ställa in rullrotationen, steg för steg. När du ska börja arbeta med Slim och rotationsenheten finns det ett antal steg att följa. https://stream.brmlasers.com/b708c98c-ee7d-428f-962c-8d1d59f97ef9/playlist.m3u8 https://iframe.mediadelivery.net/embed/330148/b708c98c-ee7d-428f-962c-8d1d59f97ef9 160 10 2026-02-11T10:31:19.616Z yes no no https://support.brmlasers.com/sv/videos/mirror-alignment-step-by-step https://stream.brmlasers.com/19039523-7aa5-4677-bc15-37fdeaa92e51/thumbnail.jpg Spegeljustering steg för steg Spegeljustering steg för steg: spegel 1, spegel 2, spegel 3 och laserkällan. Du använder gärna maskinen, men nu måste den flyttas. När maskinen ska flyttas eller omplaceras finns det några saker du behöver tänka på. https://stream.brmlasers.com/19039523-7aa5-4677-bc15-37fdeaa92e51/playlist.m3u8 https://iframe.mediadelivery.net/embed/330148/19039523-7aa5-4677-bc15-37fdeaa92e51 184 1018 2024-10-22T06:18:43.406Z yes no no https://support.brmlasers.com/sv/videos/installing-and-using-the-chuck-rotary-on-the-brm-original https://stream.brmlasers.com/b52cbd56-f39f-4d25-a4db-454ec8130e6b/thumbnail.jpg Montera och använda rotationen med chuck på BRM Original Montera och använda rotationen med chuck på BRM Original. Har du en BRM Original har du fått en rotationsenhet med chuck till maskinen. Videon nedan visar hur du monterar och använder den. https://stream.brmlasers.com/b52cbd56-f39f-4d25-a4db-454ec8130e6b/playlist.m3u8 https://iframe.mediadelivery.net/embed/330148/b52cbd56-f39f-4d25-a4db-454ec8130e6b 135 202 2024-10-22T06:18:42.025Z yes no no https://support.brmlasers.com/sv/videos/taking-the-lens-out-of-the-lens-shaft-and-fitting-it-back https://stream.brmlasers.com/f97db4e2-4546-4508-b12c-ef7d535e485b/thumbnail.jpg Ta ut linsen ur linsaxeln och sätta tillbaka den Ta ut linsen ur linsaxeln och sätta tillbaka den, med den konvexa sidan uppåt. Så monterar du en lins till en CO₂-laser rätt: den kupade sidan uppåt, den plana nedåt, och låsringen fast utan att repa optiken. https://stream.brmlasers.com/f97db4e2-4546-4508-b12c-ef7d535e485b/playlist.m3u8 https://iframe.mediadelivery.net/embed/330148/f97db4e2-4546-4508-b12c-ef7d535e485b 39 241 2024-10-22T06:18:36.981Z yes no no https://support.brmlasers.com/sv/videos/finding-the-ideal-focus-height-by-hand https://stream.brmlasers.com/e51275db-de1f-4ee4-9209-790007d9d0cc/thumbnail.jpg Hitta den ideala fokushöjden för hand Hitta den ideala fokushöjden för hand, steg för steg. Exakt fokusavstånd och höjd på fokusmallen för linser på 50,8 mm, 63,5 mm och 101,6 mm på BRM Pro, Slim, Original och Budget. https://stream.brmlasers.com/e51275db-de1f-4ee4-9209-790007d9d0cc/playlist.m3u8 https://iframe.mediadelivery.net/embed/330148/e51275db-de1f-4ee4-9209-790007d9d0cc 61 248 2024-10-22T06:18:34.862Z yes no no https://support.brmlasers.com/sv/videos/focal-lengths-of-the-different-lenses https://stream.brmlasers.com/11ca46b5-141f-47e8-a254-8aebface1961/thumbnail.jpg Brännvidderna för de olika linserna och vilken linsposition varje lins behöver Brännvidderna för de olika linserna och vilken linsposition varje lins behöver. Så mäter och bestämmer du brännvidden på en omärkt lins till en CO₂-laser, med en enkel ljusprojektion och mätning av brännpunkten. https://stream.brmlasers.com/11ca46b5-141f-47e8-a254-8aebface1961/playlist.m3u8 https://iframe.mediadelivery.net/embed/330148/11ca46b5-141f-47e8-a254-8aebface1961 80 378 2024-10-22T06:18:24.620Z yes no no https://support.brmlasers.com/sv/videos/the-frame-slop-error-explained https://stream.brmlasers.com/1f90c039-6847-415c-acb2-927bdd16f18f/thumbnail.jpg Felmeddelandet Frame slop förklarat Felmeddelandet Frame slop förklarat. Felmeddelanden kommer aldrig lägligt. Här ser du hur du åtgärdar vilket fel. https://stream.brmlasers.com/1f90c039-6847-415c-acb2-927bdd16f18f/playlist.m3u8 https://iframe.mediadelivery.net/embed/330148/1f90c039-6847-415c-acb2-927bdd16f18f 36 12 2024-10-22T06:18:23.550Z yes no no https://support.brmlasers.com/pl/videos/using-cermark-from-start-to-finish https://stream.brmlasers.com/31bfd739-1532-48f5-b70c-df0be1e450b6/thumbnail_227fac0c.jpg CerMark od początku do końca CerMark od początku do końca: odtłuszczanie detalu, wstrząsanie i natryskiwanie puszki, suszenie powłoki, znakowanie laserem i spłukiwanie pozostałości. Znakowanie metalu, szkła i ceramiki sprayem do znakowania laserowego CerMark na laserze CO₂: czyszczenie powierzchni, natryskiwanie równej warstwy, suszenie, ustawienia lasera, spłukiwanie i przechowywanie puszki. https://stream.brmlasers.com/31bfd739-1532-48f5-b70c-df0be1e450b6/playlist.m3u8 https://iframe.mediadelivery.net/embed/330148/31bfd739-1532-48f5-b70c-df0be1e450b6 53 2026-10-01T12:22:23.996Z yes no no https://support.brmlasers.com/pl/videos/dragging-the-brm-package-into-lightburn https://stream.brmlasers.com/fbe39b0e-cacd-43ca-bf1f-2cf7bfc71170/thumbnail.jpg Przeciąganie pakietu BRM do LightBurn Przeciąganie pakietu BRM do LightBurn, import i przypisanie warstwie ustawienia materiału. LightBurn potrafi importować pakiety producentów z profilami maszyn. Jak zaimportować pakiet BRM i wybrać swoją maszynę oraz biblioteki materiałów. https://stream.brmlasers.com/fbe39b0e-cacd-43ca-bf1f-2cf7bfc71170/playlist.m3u8 https://iframe.mediadelivery.net/embed/330148/fbe39b0e-cacd-43ca-bf1f-2cf7bfc71170 48 94 2026-02-24T15:30:16.311Z yes no no https://support.brmlasers.com/pl/videos/setting-up-the-roller-rotary https://stream.brmlasers.com/b708c98c-ee7d-428f-962c-8d1d59f97ef9/thumbnail_b3aadc31.jpg Konfiguracja obrotnicy rolkowej krok po kroku Konfiguracja obrotnicy rolkowej krok po kroku. Kroki potrzebne do pracy z obrotnicą w BRM Slim, zarówno rolkową, jak i szczękową, łącznie z ustawieniami w LightBurn i powrotem do pracy na stole. https://stream.brmlasers.com/b708c98c-ee7d-428f-962c-8d1d59f97ef9/playlist.m3u8 https://iframe.mediadelivery.net/embed/330148/b708c98c-ee7d-428f-962c-8d1d59f97ef9 160 10 2026-02-11T10:31:19.616Z yes no no https://support.brmlasers.com/pl/videos/mirror-alignment-step-by-step https://stream.brmlasers.com/19039523-7aa5-4677-bc15-37fdeaa92e51/thumbnail.jpg Justowanie luster krok po kroku Justowanie luster krok po kroku: lustro 1, lustro 2, lustro 3 i źródło lasera. Maszynę trzeba przenieść lub przewieźć w inne miejsce. Jakie są ryzyka, jakich informacji potrzebujemy do wyceny przeprowadzki i jak ponownie uruchomić maszynę po przeniesieniu. https://stream.brmlasers.com/19039523-7aa5-4677-bc15-37fdeaa92e51/playlist.m3u8 https://iframe.mediadelivery.net/embed/330148/19039523-7aa5-4677-bc15-37fdeaa92e51 184 1018 2024-10-22T06:18:43.406Z yes no no https://support.brmlasers.com/pl/videos/installing-and-using-the-chuck-rotary-on-the-brm-original https://stream.brmlasers.com/b52cbd56-f39f-4d25-a4db-454ec8130e6b/thumbnail.jpg Montaż i obsługa obrotnicy szczękowej BRM Original Montaż i obsługa obrotnicy szczękowej BRM Original. Circle pulse to liczba kroków, jakich silnik potrzebuje na jeden pełny obrót. Wartość zależy od silnika obrotnicy. Jak ją odczytać lub samodzielnie wyznaczyć testem. https://stream.brmlasers.com/b52cbd56-f39f-4d25-a4db-454ec8130e6b/playlist.m3u8 https://iframe.mediadelivery.net/embed/330148/b52cbd56-f39f-4d25-a4db-454ec8130e6b 135 202 2024-10-22T06:18:42.025Z yes no no https://support.brmlasers.com/pl/videos/taking-the-lens-out-of-the-lens-shaft-and-fitting-it-back https://stream.brmlasers.com/f97db4e2-4546-4508-b12c-ef7d535e485b/thumbnail.jpg Wyjmowanie soczewki z tubusu i ponowny montaż Wyjmowanie soczewki z tubusu i ponowny montaż, stroną wypukłą do góry. Wyjmowanie soczewki z tubusu i ponowny montaż stroną wypukłą do góry, z filmem instruktażowym. https://stream.brmlasers.com/f97db4e2-4546-4508-b12c-ef7d535e485b/playlist.m3u8 https://iframe.mediadelivery.net/embed/330148/f97db4e2-4546-4508-b12c-ef7d535e485b 39 241 2024-10-22T06:18:36.981Z yes no no https://support.brmlasers.com/pl/videos/finding-the-ideal-focus-height-by-hand https://stream.brmlasers.com/e51275db-de1f-4ee4-9209-790007d9d0cc/thumbnail.jpg Ręczne ustalanie idealnej wysokości ogniskowania krok po kroku Ręczne ustalanie idealnej wysokości ogniskowania krok po kroku. Ręczne ustawianie właściwej wysokości ogniskowania krok po kroku dla każdej soczewki, z filmem instruktażowym. https://stream.brmlasers.com/e51275db-de1f-4ee4-9209-790007d9d0cc/playlist.m3u8 https://iframe.mediadelivery.net/embed/330148/e51275db-de1f-4ee4-9209-790007d9d0cc 61 248 2024-10-22T06:18:34.862Z yes no no https://support.brmlasers.com/pl/videos/focal-lengths-of-the-different-lenses https://stream.brmlasers.com/11ca46b5-141f-47e8-a254-8aebface1961/thumbnail.jpg Ogniskowe poszczególnych soczewek i położenie Ogniskowe poszczególnych soczewek i położenie, którego wymaga każda z nich. Wybór soczewki do zastosowania: 50,8 mm (grawerowanie detali), 63,5 mm (uniwersalna) i 101,6 mm (cięcie grubych materiałów) oraz ich właściwości. https://stream.brmlasers.com/11ca46b5-141f-47e8-a254-8aebface1961/playlist.m3u8 https://iframe.mediadelivery.net/embed/330148/11ca46b5-141f-47e8-a254-8aebface1961 80 378 2024-10-22T06:18:24.620Z yes no no https://support.brmlasers.com/pl/videos/the-frame-slop-error-explained https://stream.brmlasers.com/1f90c039-6847-415c-acb2-927bdd16f18f/thumbnail.jpg Komunikat błędu Frame slop Komunikat błędu Frame slop: objaśnienie. Co oznaczają komunikaty Machine protected, Hard Limit Prot, X/Y Slop over, Frame slop i Water prot 1 na wyświetlaczu maszyny i jak usunąć każdy z nich. https://stream.brmlasers.com/1f90c039-6847-415c-acb2-927bdd16f18f/playlist.m3u8 https://iframe.mediadelivery.net/embed/330148/1f90c039-6847-415c-acb2-927bdd16f18f 36 12 2024-10-22T06:18:23.550Z yes no no https://support.brmlasers.com/ro/videos/using-cermark-from-start-to-finish https://stream.brmlasers.com/31bfd739-1532-48f5-b70c-df0be1e450b6/thumbnail_227fac0c.jpg CerMark de la început până la sfârșit CerMark de la început până la sfârșit: degresarea piesei, agitarea și pulverizarea tubului, uscarea stratului, marcarea cu laserul și clătirea reziduurilor. Cum marcați metal, sticlă și ceramică cu spray-ul de marcare laser CerMark pe un laser CO₂: curățarea suprafeței, pulverizarea unui strat uniform, uscarea, setările laserului, clătirea și depozitarea tubului. https://stream.brmlasers.com/31bfd739-1532-48f5-b70c-df0be1e450b6/playlist.m3u8 https://iframe.mediadelivery.net/embed/330148/31bfd739-1532-48f5-b70c-df0be1e450b6 53 2026-10-01T12:22:23.996Z yes no no https://support.brmlasers.com/ro/videos/dragging-the-brm-package-into-lightburn https://stream.brmlasers.com/fbe39b0e-cacd-43ca-bf1f-2cf7bfc71170/thumbnail.jpg Tragerea pachetului BRM în LightBurn Tragerea pachetului BRM în LightBurn, importul și atribuirea unei setări de material unui strat. LightBurn poate importa pachete de producător cu profiluri de mașină. Iată cum importați pachetul BRM. https://stream.brmlasers.com/fbe39b0e-cacd-43ca-bf1f-2cf7bfc71170/playlist.m3u8 https://iframe.mediadelivery.net/embed/330148/fbe39b0e-cacd-43ca-bf1f-2cf7bfc71170 48 94 2026-02-24T15:30:16.311Z yes no no https://support.brmlasers.com/ro/videos/setting-up-the-roller-rotary https://stream.brmlasers.com/b708c98c-ee7d-428f-962c-8d1d59f97ef9/thumbnail_b3aadc31.jpg Configurarea unității de rotație cu role Configurarea unității de rotație cu role, pas cu pas. Pașii pe care trebuie să-i urmați pentru a folosi mașina Pro cu unitatea de rotație cu role. https://stream.brmlasers.com/b708c98c-ee7d-428f-962c-8d1d59f97ef9/playlist.m3u8 https://iframe.mediadelivery.net/embed/330148/b708c98c-ee7d-428f-962c-8d1d59f97ef9 160 10 2026-02-11T10:31:19.616Z yes no no https://support.brmlasers.com/ro/videos/mirror-alignment-step-by-step https://stream.brmlasers.com/19039523-7aa5-4677-bc15-37fdeaa92e51/thumbnail.jpg Alinierea oglinzilor pas cu pas Alinierea oglinzilor pas cu pas: oglinda 1, oglinda 2, oglinda 3 și sursa laser. La tăiere sau gravare poate apărea o a doua linie, cu exact aceeași formă, dar ușor decalată. La tăiere, o linie este de obicei mai subțire și pătrunde în material, iar a doua este mai lată și lasă doar o urmă superficială. https://stream.brmlasers.com/19039523-7aa5-4677-bc15-37fdeaa92e51/playlist.m3u8 https://iframe.mediadelivery.net/embed/330148/19039523-7aa5-4677-bc15-37fdeaa92e51 184 1018 2024-10-22T06:18:43.406Z yes no no https://support.brmlasers.com/ro/videos/installing-and-using-the-chuck-rotary-on-the-brm-original https://stream.brmlasers.com/b52cbd56-f39f-4d25-a4db-454ec8130e6b/thumbnail.jpg Montarea și folosirea rotației cu mandrină a BRM Original Montarea și folosirea rotației cu mandrină a BRM Original. Valoarea circle pulse este numărul de pași pe care motorul trebuie să-i facă pentru o rotație completă. În funcție de motorul montat, numărul de pulsuri diferă, deci aveți nevoie și de o altă valoare. https://stream.brmlasers.com/b52cbd56-f39f-4d25-a4db-454ec8130e6b/playlist.m3u8 https://iframe.mediadelivery.net/embed/330148/b52cbd56-f39f-4d25-a4db-454ec8130e6b 135 202 2024-10-22T06:18:42.025Z yes no no https://support.brmlasers.com/ro/videos/taking-the-lens-out-of-the-lens-shaft-and-fitting-it-back https://stream.brmlasers.com/f97db4e2-4546-4508-b12c-ef7d535e485b/thumbnail.jpg Scoaterea lentilei din tubul lentilei și montarea ei la loc Scoaterea lentilei din tubul lentilei și montarea ei la loc, cu partea convexă în sus. Cum scoateți lentila din tubul lentilei și cum o montați la loc, cu partea convexă în sus. https://stream.brmlasers.com/f97db4e2-4546-4508-b12c-ef7d535e485b/playlist.m3u8 https://iframe.mediadelivery.net/embed/330148/f97db4e2-4546-4508-b12c-ef7d535e485b 39 241 2024-10-22T06:18:36.981Z yes no no https://support.brmlasers.com/ro/videos/finding-the-ideal-focus-height-by-hand https://stream.brmlasers.com/e51275db-de1f-4ee4-9209-790007d9d0cc/thumbnail.jpg Determinarea manuală a înălțimii ideale de focalizare Determinarea manuală a înălțimii ideale de focalizare, pas cu pas. Cum setați manual înălțimea corectă de focalizare pentru fiecare lentilă, pentru linii de tăiere și gravare curate. https://stream.brmlasers.com/e51275db-de1f-4ee4-9209-790007d9d0cc/playlist.m3u8 https://iframe.mediadelivery.net/embed/330148/e51275db-de1f-4ee4-9209-790007d9d0cc 61 248 2024-10-22T06:18:34.862Z yes no no https://support.brmlasers.com/ro/videos/focal-lengths-of-the-different-lenses https://stream.brmlasers.com/11ca46b5-141f-47e8-a254-8aebface1961/thumbnail.jpg Distanțele focale ale diferitelor lentile și poziția de care are nevoie fiecare Distanțele focale ale diferitelor lentile și poziția de care are nevoie fiecare. Verificați ce lentile sunt compatibile cu mașina dumneavoastră BRM și cum sunt configurate tuburile lentilei la modelele Budget, Original, Pro și Slim. https://stream.brmlasers.com/11ca46b5-141f-47e8-a254-8aebface1961/playlist.m3u8 https://iframe.mediadelivery.net/embed/330148/11ca46b5-141f-47e8-a254-8aebface1961 80 378 2024-10-22T06:18:24.620Z yes no no https://support.brmlasers.com/ro/videos/the-frame-slop-error-explained https://stream.brmlasers.com/1f90c039-6847-415c-acb2-927bdd16f18f/thumbnail.jpg Mesajul de eroare Frame slop Mesajul de eroare Frame slop, explicat. Ce înseamnă mesajele de eroare de pe afișajul mașinii laser, precum Machine protected, Hard Limit Prot, X/Y Slop over, Frame slop și Water prot, și cum le rezolvați. https://stream.brmlasers.com/1f90c039-6847-415c-acb2-927bdd16f18f/playlist.m3u8 https://iframe.mediadelivery.net/embed/330148/1f90c039-6847-415c-acb2-927bdd16f18f 36 12 2024-10-22T06:18:23.550Z yes no no https://support.brmlasers.com/ar/videos/using-cermark-from-start-to-finish https://stream.brmlasers.com/31bfd739-1532-48f5-b70c-df0be1e450b6/thumbnail_227fac0c.jpg CerMark من البداية إلى النهاية CerMark من البداية إلى النهاية: إزالة الدهون عن القطعة، ورجّ العبوة والرش، وتجفيف الطلاء، والوسم بالليزر، وشطف البقايا. كيف تسِم المعدن والزجاج والسيراميك ببخاخ الوسم بالليزر CerMark على ليزر CO₂: تنظيف السطح، ورش طبقة متساوية، والتجفيف، وإعدادات الليزر، والشطف، وتخزين العبوة. https://stream.brmlasers.com/31bfd739-1532-48f5-b70c-df0be1e450b6/playlist.m3u8 https://iframe.mediadelivery.net/embed/330148/31bfd739-1532-48f5-b70c-df0be1e450b6 53 2026-10-01T12:22:23.996Z yes no no https://support.brmlasers.com/ar/videos/dragging-the-brm-package-into-lightburn https://stream.brmlasers.com/fbe39b0e-cacd-43ca-bf1f-2cf7bfc71170/thumbnail.jpg سحب حزمة BRM إلى LightBurn واستيرادها وتعيين إعداد مادة لطبقة سحب حزمة BRM إلى LightBurn واستيرادها وتعيين إعداد مادة لطبقة. يستطيع LightBurn استيراد حزم المورّدين التي تضم ملفات تعريف الماكينات، فكيف أفعل ذلك؟ https://stream.brmlasers.com/fbe39b0e-cacd-43ca-bf1f-2cf7bfc71170/playlist.m3u8 https://iframe.mediadelivery.net/embed/330148/fbe39b0e-cacd-43ca-bf1f-2cf7bfc71170 48 94 2026-02-24T15:30:16.311Z yes no no https://support.brmlasers.com/ar/videos/setting-up-the-roller-rotary https://stream.brmlasers.com/b708c98c-ee7d-428f-962c-8d1d59f97ef9/thumbnail_b3aadc31.jpg إعداد وحدة الدوران ذات البكرات خطوة بخطوة إعداد وحدة الدوران ذات البكرات خطوة بخطوة. حين تريد بدء العمل بماكينة Slim ووحدة الدوران، هناك عدد من الخطوات التي يجب اتباعها. https://stream.brmlasers.com/b708c98c-ee7d-428f-962c-8d1d59f97ef9/playlist.m3u8 https://iframe.mediadelivery.net/embed/330148/b708c98c-ee7d-428f-962c-8d1d59f97ef9 160 10 2026-02-11T10:31:19.616Z yes no no https://support.brmlasers.com/ar/videos/mirror-alignment-step-by-step https://stream.brmlasers.com/19039523-7aa5-4677-bc15-37fdeaa92e51/thumbnail.jpg محاذاة المرايا خطوة بخطوة محاذاة المرايا خطوة بخطوة: المرآة 1 والمرآة 2 والمرآة 3 ومصدر الليزر. عند القطع أو الحفر قد ترى خطًا ثانيًا يظهر بالشكل نفسه تمامًا لكن بإزاحة طفيفة. وفي القطع يكون أحد الخطين أرفع قليلًا ويخترق المادة، بينما يكون الثاني أعرض قليلًا ولا يترك سوى أثر سطحي. https://stream.brmlasers.com/19039523-7aa5-4677-bc15-37fdeaa92e51/playlist.m3u8 https://iframe.mediadelivery.net/embed/330148/19039523-7aa5-4677-bc15-37fdeaa92e51 184 1018 2024-10-22T06:18:43.406Z yes no no https://support.brmlasers.com/ar/videos/installing-and-using-the-chuck-rotary-on-the-brm-original https://stream.brmlasers.com/b52cbd56-f39f-4d25-a4db-454ec8130e6b/thumbnail.jpg تركيب الدوران بالظرف القابض في BRM Original واستخدامه تركيب الدوران بالظرف القابض في BRM Original واستخدامه. إن كنت تملك ماكينة BRM Original فقد حصلت معها على وحدة دوران بظرف قابض. ويبيّن الفيديو أدناه كيفية تركيبها واستخدامها. https://stream.brmlasers.com/b52cbd56-f39f-4d25-a4db-454ec8130e6b/playlist.m3u8 https://iframe.mediadelivery.net/embed/330148/b52cbd56-f39f-4d25-a4db-454ec8130e6b 135 202 2024-10-22T06:18:42.025Z yes no no https://support.brmlasers.com/ar/videos/taking-the-lens-out-of-the-lens-shaft-and-fitting-it-back https://stream.brmlasers.com/f97db4e2-4546-4508-b12c-ef7d535e485b/thumbnail.jpg نزع العدسة من عمود العدسة وإعادة تركيبها والوجه المحدّب لأعلى نزع العدسة من عمود العدسة وإعادة تركيبها والوجه المحدّب لأعلى. كيف تركّب عدسة ليزر CO₂ في الاتجاه الصحيح: الجانب المحدّب للأعلى والمسطّح للأسفل، وتثبّت حلقة التثبيت دون خدش البصريات. https://stream.brmlasers.com/f97db4e2-4546-4508-b12c-ef7d535e485b/playlist.m3u8 https://iframe.mediadelivery.net/embed/330148/f97db4e2-4546-4508-b12c-ef7d535e485b 39 241 2024-10-22T06:18:36.981Z yes no no https://support.brmlasers.com/ar/videos/finding-the-ideal-focus-height-by-hand https://stream.brmlasers.com/e51275db-de1f-4ee4-9209-790007d9d0cc/thumbnail.jpg تحديد ارتفاع التركيز المثالي يدويًا تحديد ارتفاع التركيز المثالي يدويًا، خطوة بخطوة. مسافة التبئير الدقيقة وارتفاع أداة القياس للعدسات 50.8 و63.5 و101.6 مم في ماكينات BRM Pro وSlim وOriginal وBudget. https://stream.brmlasers.com/e51275db-de1f-4ee4-9209-790007d9d0cc/playlist.m3u8 https://iframe.mediadelivery.net/embed/330148/e51275db-de1f-4ee4-9209-790007d9d0cc 61 248 2024-10-22T06:18:34.862Z yes no no https://support.brmlasers.com/ar/videos/focal-lengths-of-the-different-lenses https://stream.brmlasers.com/11ca46b5-141f-47e8-a254-8aebface1961/thumbnail.jpg الأبعاد البؤرية للعدسات المختلفة الأبعاد البؤرية للعدسات المختلفة، وموضع العدسة الذي تحتاجه كل منها. اختر العدسة المناسبة لتطبيقك. تعرّف على عدسات 50.8mm (الحفر الدقيق) و63.5mm (للاستخدام العام) و101.6mm (قطع المواد السميكة) وخصائص كل منها. https://stream.brmlasers.com/11ca46b5-141f-47e8-a254-8aebface1961/playlist.m3u8 https://iframe.mediadelivery.net/embed/330148/11ca46b5-141f-47e8-a254-8aebface1961 80 378 2024-10-22T06:18:24.620Z yes no no https://support.brmlasers.com/ar/videos/the-frame-slop-error-explained https://stream.brmlasers.com/1f90c039-6847-415c-acb2-927bdd16f18f/thumbnail.jpg شرح رسالة الخطأ Frame slop شرح رسالة الخطأ Frame slop. دليل لرسائل الخطأ في وحدات التحكم Ruida وLeetro على ماكينات الليزر من BRM: أسبابها وما يطلقها من أنظمة الأمان وكيف تحلها خطوة بخطوة. https://stream.brmlasers.com/1f90c039-6847-415c-acb2-927bdd16f18f/playlist.m3u8 https://iframe.mediadelivery.net/embed/330148/1f90c039-6847-415c-acb2-927bdd16f18f 36 12 2024-10-22T06:18:23.550Z yes no no https://support.brmlasers.com/es/videos/using-cermark-from-start-to-finish https://stream.brmlasers.com/31bfd739-1532-48f5-b70c-df0be1e450b6/thumbnail_227fac0c.jpg CerMark de principio a fin CerMark de principio a fin: desengrasar la pieza, agitar y pulverizar el bote, secar el recubrimiento, marcar con el láser y aclarar los restos. Cómo marcar metal, vidrio y cerámica con el spray de marcado láser CerMark en un láser CO₂: limpiar la superficie, pulverizar una capa uniforme, secar, ajustes del láser, aclarar y guardar el bote. https://stream.brmlasers.com/31bfd739-1532-48f5-b70c-df0be1e450b6/playlist.m3u8 https://iframe.mediadelivery.net/embed/330148/31bfd739-1532-48f5-b70c-df0be1e450b6 53 2026-10-01T12:22:23.996Z yes no no https://support.brmlasers.com/es/videos/dragging-the-brm-package-into-lightburn https://stream.brmlasers.com/fbe39b0e-cacd-43ca-bf1f-2cf7bfc71170/thumbnail.jpg Arrastrar el paquete BRM a LightBurn Arrastrar el paquete BRM a LightBurn, importarlo y asignar un ajuste de material a una capa. Cómo importar los paquetes oficiales de fabricante de BRM (.lbdev) en LightBurn 2.0 y posteriores para configurar el perfil de su máquina láser, el área de trabajo y los puntos de origen. https://stream.brmlasers.com/fbe39b0e-cacd-43ca-bf1f-2cf7bfc71170/playlist.m3u8 https://iframe.mediadelivery.net/embed/330148/fbe39b0e-cacd-43ca-bf1f-2cf7bfc71170 48 94 2026-02-24T15:30:16.311Z yes no no https://support.brmlasers.com/es/videos/setting-up-the-roller-rotary https://stream.brmlasers.com/b708c98c-ee7d-428f-962c-8d1d59f97ef9/thumbnail_b3aadc31.jpg Montar la unidad de rotación de rodillos Montar la unidad de rotación de rodillos, paso a paso. Instrucciones paso a paso para conectar, configurar y calibrar la unidad de rotación de rodillos de las máquinas láser BRM Pro y Slim para grabado cilíndrico. https://stream.brmlasers.com/b708c98c-ee7d-428f-962c-8d1d59f97ef9/playlist.m3u8 https://iframe.mediadelivery.net/embed/330148/b708c98c-ee7d-428f-962c-8d1d59f97ef9 160 10 2026-02-11T10:31:19.616Z yes no no https://support.brmlasers.com/es/videos/mirror-alignment-step-by-step https://stream.brmlasers.com/19039523-7aa5-4677-bc15-37fdeaa92e51/thumbnail.jpg Alineación de los espejos paso a paso Alineación de los espejos paso a paso: espejo 1, espejo 2, espejo 3 y la fuente láser. Guía completa para alinear los tres espejos de su máquina láser CO₂ con dianas de cinta térmica, para un enfoque nítido y una potencia de corte uniforme. https://stream.brmlasers.com/19039523-7aa5-4677-bc15-37fdeaa92e51/playlist.m3u8 https://iframe.mediadelivery.net/embed/330148/19039523-7aa5-4677-bc15-37fdeaa92e51 184 1018 2024-10-22T06:18:43.406Z yes no no https://support.brmlasers.com/es/videos/installing-and-using-the-chuck-rotary-on-the-brm-original https://stream.brmlasers.com/b52cbd56-f39f-4d25-a4db-454ec8130e6b/thumbnail.jpg Montar y usar la rotación de garras de la BRM Original Montar y usar la rotación de garras de la BRM Original. Cómo calcular y configurar en LaserWork el valor correcto de circle pulse (pulsos por vuelta) de la unidad de rotación de garras de la BRM Original según la relación de pasos del motor. https://stream.brmlasers.com/b52cbd56-f39f-4d25-a4db-454ec8130e6b/playlist.m3u8 https://iframe.mediadelivery.net/embed/330148/b52cbd56-f39f-4d25-a4db-454ec8130e6b 135 202 2024-10-22T06:18:42.025Z yes no no https://support.brmlasers.com/es/videos/taking-the-lens-out-of-the-lens-shaft-and-fitting-it-back https://stream.brmlasers.com/f97db4e2-4546-4508-b12c-ef7d535e485b/thumbnail.jpg Sacar la lente del tubo de la lente y volver a colocarla Sacar la lente del tubo de la lente y volver a colocarla, con la cara convexa hacia arriba. Cómo montar y orientar correctamente una lente de láser CO₂: cara convexa hacia arriba, cara plana hacia abajo, y cómo fijar el anillo de retención sin rayar la óptica. https://stream.brmlasers.com/f97db4e2-4546-4508-b12c-ef7d535e485b/playlist.m3u8 https://iframe.mediadelivery.net/embed/330148/f97db4e2-4546-4508-b12c-ef7d535e485b 39 241 2024-10-22T06:18:36.981Z yes no no https://support.brmlasers.com/es/videos/finding-the-ideal-focus-height-by-hand https://stream.brmlasers.com/e51275db-de1f-4ee4-9209-790007d9d0cc/thumbnail.jpg Determinar a mano la altura de enfoque ideal Determinar a mano la altura de enfoque ideal, paso a paso. Encuentre la distancia de enfoque exacta y la altura en la galga escalonada para las lentes de 50,8 mm, 63,5 mm y 101,6 mm en las máquinas láser BRM Pro, Slim, Original y Budget. https://stream.brmlasers.com/e51275db-de1f-4ee4-9209-790007d9d0cc/playlist.m3u8 https://iframe.mediadelivery.net/embed/330148/e51275db-de1f-4ee4-9209-790007d9d0cc 61 248 2024-10-22T06:18:34.862Z yes no no https://support.brmlasers.com/es/videos/focal-lengths-of-the-different-lenses https://stream.brmlasers.com/11ca46b5-141f-47e8-a254-8aebface1961/thumbnail.jpg Las distancias focales de las distintas lentes y la posición que necesita cada una Las distancias focales de las distintas lentes y la posición que necesita cada una. Compruebe la compatibilidad de las lentes y la configuración del tubo de la lente de las máquinas láser BRM Pro, Slim, Original y Budget para las distancias focales estándar. https://stream.brmlasers.com/11ca46b5-141f-47e8-a254-8aebface1961/playlist.m3u8 https://iframe.mediadelivery.net/embed/330148/11ca46b5-141f-47e8-a254-8aebface1961 80 378 2024-10-22T06:18:24.620Z yes no no https://support.brmlasers.com/es/videos/the-frame-slop-error-explained https://stream.brmlasers.com/1f90c039-6847-415c-acb2-927bdd16f18f/thumbnail.jpg El mensaje de error Frame slop El mensaje de error Frame slop, explicado. Guía completa de los mensajes de error de los controladores Ruida y Leetro en las máquinas láser BRM, con sus causas, los disparos de seguridad y las soluciones paso a paso. https://stream.brmlasers.com/1f90c039-6847-415c-acb2-927bdd16f18f/playlist.m3u8 https://iframe.mediadelivery.net/embed/330148/1f90c039-6847-415c-acb2-927bdd16f18f 36 12 2024-10-22T06:18:23.550Z yes no no