Tips and tricks
Machines
Can the laser machine and water chiller withstand the cold? A laser machine needs an ambient temperature of 15 °C to 33 °C. If the temperature in the room where the laser machine is located is below or above this, the machine will not work optimally. The result is less laser power and an inferior quality of the laser beam. This is of course reflected in your product, an engraving will look different and it will be a little more difficult to cut your material nicely.
> How do I adjust the auto focus of my BRM Slim and Pro? The auto focus is a sensor that automatically selects the correct height relative to your material. This eliminates the need to manually determine the correct focus height between your material and the nozzle under the lens shaft.
> These things are important to know before moving your laser machine You like to use the machine but actually the machine needs to be moved. When the machine needs to be moved or relocated then there are some things you need to consider.
> What can you do about reflection on your material? What can you do about reflection on your material?
> What is a MSDS? It seems like the laser machine can machine all materials. Indeed, there are many materials that you can simply machine with the laser machine. But there are also exceptions.
> Rotation system
How do I find the circle pulse of the claw rotation BRM Original? The circle pulse is the ratio of the number of steps the motor has to do to rotate 1 x. Depending on the motor that is on the machine, the number the number of pulses is different and you also need a different value.
> How do I make my Slim machine and rotation ready for use? When you want to start working with the Slim and rotation there are a number of steps to follow.
>